TypeS BT56208 Directives D'utilisation Et D'entretien page 14

DISABLING / ENABLING STARTUP HELP
The Startup Help message will appear by default each time you plug in your Monitor.
To Disable or Enable this message:
• Press and hold
BACKUP CAM POWER / LED INDICATORS
BACKUP CAM POWER, MODES & LED INDICATORS
Power / Mode Status
Power On
Press Power button and release, Camera will power on.
Power Off
Press Power button and release, Camera will power off.
Pairing Mode
To begin Pairing Mode, press the Power button on Camera until
blue LED light flashes quickly. Now Camera is in Pairing Mode.
Low Battery Power Off Mode
Camera will power off when the battery is dead.
USB Charging
This LED light is behind USB port.
14
for 3 seconds to either disable or enable the opening screen startup message.
LED Indicators
Blue LED light flashes 2 times when Camera is powered on.
Blue LED light flashes 1 time when the Camera is powered off.
Blue LED light flashes quickly for 1 minute or until pairing success
is complete.
Red LED light flashes to indicate low battery.
While charging, the Red LED light will remain solid. When Camera is
fully charged, Red LED light turns off.