Midas HD96-24-CC-TP Guide De Démarrage Rapide page 12

22
HD96-24-CC-TP
HD96-24 Basic Operation
System components
Below is a list of currently compatible system I/O components with the
HD software. When I/O is connected to the HD96-24 system it will be necessary to be update to the latest HD I/O software. The updater is built into the console and
guides you through the update process. Once updated, I/O boxes will still be compatible with Pro Series consoles.
Note: I/O boxes will need to be updated in order to work with the HD96-24 system. The I/O Box and Device updater can be found in the Update
Manager page. With all your I/O connected press Sync I/O and follow the instructions. Updated I/O boxes are fully compatible with
Pro Series consoles.
I/O UNIT
DL231 - 2 award-winning Midas microphone
preamplifi ers per input with switchable +48 V
phantom power 2 dual redundant AES50 network
ports with independent phase-locked loop
synchronisation 24 electronically balanced output
channels can be sourced from microphone
preamplifiers or AES50 ports
DL151 - 24 award-winning Midas analogue
mic preamps with switchable +48 V phantom power
DL152 - 24 active-balanced low impedance
line-level outputs
DL153 - 16 award-winning Midas analogue mic
preamps with switchable +48 V phantom power
8 active-balanced low impedance line-level outputs
DL154 - 16 active-balanced low impedance
line-level outputs 8 award-winning Midas analogue
mic preamps with switchable +48 V phantom power
DL155 - 8 award-winning Midas analogue mic
preamps with switchable +48 V phantom power
8 active-balanced low-impedance line level outputs
8 AES3 (AES/EBU) digital inputs and 8
DL251 - Audio System I/O This is supplied as a fixed
configuration unit with 48 mic/line inputs and
16 outputs.
DL252 - Audio System I/O This is supplied as a fixed
configuration unit with 16 mic/line inputs and
48 outputs.
Connection Via DN9680
CONNECTION VIA HMAC MULTI-MODE FIBRE (UP TO 500M) OR
CAT 5E (UP TO 100M)
23
Quick Start Guide
CONNECTION VIA AES50 CAT5E
STP (UP TO 100M)