Playback; Basic Operation - Yamaha K-902 Mode D'emploi

PLAYBACK (Common to DECKs A and B)
Preparation for playback
÷ Turn on the POWER switch.
÷ Set your amplifier or receiver to cassette deck function mode.
Basic operation - To play back a cassette tape
NATURAL SOUND STEREO DOUBLE CASSETTE DECK K-902

PLAYBACK

POWER
POWER ON
1
EJECT
3 MODE
"/[/"/
RELAY
Refer to the following
description.
To fast forward or rewind the tape
When the tape running indicator # is lit:
Pressing the ⁄ button fast forwards the tape while
pressing the ! button rewinds the tape.
When the tape running indicator @ is lit:
Pressing the ! button fast forwards the tape while
pressing the ⁄ button rewinds the tape.
6
DIRECTION
! PLAY
DECK A
MUTE/SEARCH STOP
MODE DOLBY NR
DUBBING A # B
EJECT
O / p / ∏ / RELAY OFF/ B/ C
NORMAL
3 2
Insert the cassette with the exposed tape side
facing down. (The side facing you is called the
forward side and the opposite side is called the
reverse side.) To close the compartment, push
in the compartment door until it locks shut.
4
DIRECTION
4 5
!
RESET
RESET RESET DIRECTION
⁄ ! PLAY ⁄
MUTE/SEARCH STOP REC/PAUSE
EJECT
HIGH
STOP
2
DOLBY NR
OFF/
Select the tape running direction for DECK A
or B. Each time this button is pressed, the
tape running direction changes between
forward (#) and reverse (@), and the
corresponding indicator lights on the display.
To stop playback
Press the STOP button. To remove the cassette tape, press
the EJECT button. The cassette compartment door opens.
To turn off the power, press the POWER button.
To set the counter reading to "0000"
Press the RESET button. Use the tape counter to aid in
locating a point on a tape (0000 to 9999).
1
⁄
DECK B
RECORD/PLAYBACK
PHONES
REC LEVEL
5
4 6
3 7
2 8
1 9
0 10
PHONES
B/ C
Refer to the following
description.
5
PLAY