Playback (Common To Decks A And B); Basic Operation - Yamaha K-903 Mode D'emploi

PLAYBACK (Common to DECKs A and B)

Preparation for playback
÷ Turn on the STANDBY/ON switch.
÷ Set your amplifier or receiver to cassette deck function mode.
BASIC OPERATION - To play back a cassette tape
NATURAL SOUND CASSETTE DECK K-903
PLAYBACK
STANDBY/ON
STANDBY/ON
1
EJECT
3 MODE
"/[/"/
RELAY
Refer to the following
description.
To fast forward or rewind the tape
When the tape running indicator # is lit:
Pressing the ⁄ button fast forwards the tape while
pressing the ! button rewinds the tape.
When the tape running indicator @ is lit:
Pressing the ! button fast forwards the tape while
pressing the ⁄ button rewinds the tape.
6
RESET DIRECTION
%
CLOSE
!
Cassette Stabilizer
DECK A
SEARCH
MODE DOLBY NR EJECT
O / p / ∏ / RELAY
OFF/ B/ C
3 2
Insert the cassette with the exposed tape side facing down. (The side
facing you is called the forward side and the opposite side is called the
reverse side.) To close the compartment, push the section of the
compartment door marked % CLOSE until it locks shut.
4
DIRECTION
4 5
!
RESET
DIRECTION RESET
⁄ ! ⁄
PLAY PLAY
& MUTE/SEARCH & REC/PAUSE
DUBBING A # B EJECT
NORMAL HIGH
&
Select the tape running direction for DECK A
or B. Each time this button is pressed, the
tape running direction changes between
forward (#) and reverse (@), and the
corresponding indicator lights on the display.
To stop playback
Press the & button. To remove the cassette tape, press the
EJECT button. The cassette compartment door opens. To
set the unit to standby mode, press the STANDBY/ON
button.
To set the counter reading to "0000"
Press the RESET button. Use the tape counter to aid in
locating a point on a tape (0000 to 9999).
⁄
%
CLOSE
Cassette Stabilizer
DECK B
RECORD/PLAYBACK
REC LEVEL PHONES
MIN MAX
PHONES
1
2
DOLBY NR
OFF/
Refer to the following
description.
5
B/ C
PLAY