CLAS HU 1005 Manuel D'instructions page 5

HU 1005
IMPLEMENTATION OF THE CONTAINER FOR NEW BRAKE FLUID
Always ensure that the amount of new fluid is sufficient before the start of the process.
• Uncorking the bottle of new brake fluid.
• Selecting the sealing cone adapted to the diameter of the can and place it there on
• Insert the hose suction of new brake fluid through sealing cone and the container in
the housing backside of the brake bleeder
• Secure the container into the housing, using the strap.
CONNECTION
• Selecting the cap adapted to the diameter of the compensating
brake fluid vessel and screwed in place of the latter.
Note: in some cases for reasons of space, it is necessary to use
the universal plug kit SA 8017
• Connect the connecting means (vertical latch) and then lock the latch
by placing it horizontally
• Connect the black hose's) valve on the intermediate connection.
(Through the quick coupling).
ELECTRIC BRAKE BLEEDER 6bar
clas-equipements.com