Table des Matières
Publicité
ASSEMBLY INSTRUCTIONS
2. Install the faucet:
a. Remove the preassembled mounting
nuts (C) from the faucet (A) and place
the base plate (B) and the faucet (A)
in position on the sink.
b. From under the sink, thread the
mounting nuts (C) onto the faucet (A).
c. Tighten the mounting nuts (C).
Note: If the sink surface is uneven, use
silicone sealant (not included) to create a
watertight seal.
3. Connect a 1/2 in. IPS faucet connector or
coupling nuts (not included) with 3/8 in.
O.D. ball-nose risers (not included) to the
water supplies underneath the sink using
wrenches (not included).
Note: Refer to the local plumbing codes for
permissible types of water supply
connectors.
4. Before tightening the faucet connector to the
water supply, apply a second wrench to the
tube from moving or twisting when tightening
the faucet connector. Do not overtighten.
2
C
3
4
4
A
B
Publicité
Table des Matières
