Publicité
Les langues disponibles
Les langues disponibles
4. From underneath, loosely insert M8 X 30 mm bolts (Item3)
through bracket, bracket cover, rocker panel, and into U-nut
(Item 4) in position 1. Repeat for position 4, then 2, 3. See
Figure 3.
5. Loosely insert M8X30mm bolt (Item 3) through bracket and
into U-nut (Item 4) in upper rocker panel position 2. Repeat
for position 3.
6. Tighten the M8 bolts (Item 3) in lower positions to 25Nm in
the following order position 1, position 4, position 2, and
position 3.
7. Repeat step 6 for the upper positions. Tighten bolts to
25Nm.
8. Repeat steps 3 through 7 for passenger side tubular assist
step assembly.
9. Verify correct torque on all hardware.
FIGURE 3
4
Fullsize Utility Oval Tubular Assist Steps
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
3 4
3
REVISION
AUTH
IR18MR08
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
Fullsize Utility Oval Tubular Assist Steps
PART NO.
19211763
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19211763
SHEET
2
SHEET
2
6
OF
6
OF
Publicité
