Sennheiser Infraport TI 100 Notice D'emploi page 3

TI 100 infrared mono hi-fi transmitter
Infrared mono hi-fi transmitter for wireless transmission of TV and hi-fi sound.
Features
Technical data
Carrier frequency
Frequency range
S/N ratio
THD
AF connection
AF input sensitivity
Power consumption
Weight / Dimensions
Replacing the Accu
/ Recharging the accu
in the transmitter
Note
Subject to alterations.
• high IR output power
for covering an area of up to 40 m
• compact design and small dimensions
• problem-free mounting, it can be directly
connected to TV and hi-fi components
(headphone socket)
• automatic level control
• integrated charging port for two BA 90 accus
95 kHz ± 25 kHz, FM
30-18,000 Hz
65 dB(A)
< 1 %
PX-2 plug, 2 m cable, interchangeable
40 mV - 20 V
3 VA
80 g / 61 x 25 x 90 mm
• The transmitter has to be positioned as high
as possible. It has to be oriented towards the
receiver! Don't cover the transmitter, it has
to be placed in such a way that ventilation
is not obstructed!
• Adjust headphone output at TV or hi-fi compo-
nents to a medium volume. Attention: New
TV sets have a separate control for the head-
phone output! See also manual of your TV set!
In case you have problems in connecting the
device, please contact your specialized dealer
who can supply an appropriate adapter.
• The BA 90 accus are charged as long as the
transmitter is connected to mains.
• The transmitter is suited for continuous
operation.
2