Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Insufficient draught
4.6.3 Condensation in combustion chamber
•
The first few times the stove is lit, it is normal
for condensation to form, since the cladding
materials contain humidity
•
If the problem persists, make sure the wood
being used is not damp or poorly seasoned
•
Check that the chimney is not too large and
whether the fire heats it all the way to the top;
5 INFORMATION FOR
DEMOLITION AND
DISPOSAL
THE demolition and disposal of the fireplace are
the sole responsibility of the owner.
Dismantling and disposal may be entrusted to a
third party provided it is a company authorised
to salvage and eliminate said materials.
You must always abide by the laws in force in
the country of installation as regards the disposal of
materials, and report disposal if necessary
All dismantling operations for demolition must
take place when the stove is not running
Scrap the machine's structure through
authorised companies.
Dumping the stove in accessible areas is a
serious hazard for both people and animals.
The owner is always responsible for injury to
people and animals.
When the stove is demolished, the CE mark,
this manual and all the other documents
relative to the stove must be destroyed.
6 INFORMATION ON
MOVEMENT AND
TRANSPORT
When the unit is moved, be aware that it tends to
come unbalanced. Avoid jerking it or making abrupt
movements. Prior to moving the stove in any way,
make sure that the forklift has a capacity greater
than the machine to be lifted. The lifting machine
operator is fully responsible for lifting of loads.
Do not let children play with the packaging
materials as there is the risk of suffocation.
7 IDENTIFICATION
PLATE
VIt is located on the back or on the base of the
stove, and it carries the serial number. The serial
number must be provided when making any sort
of request.
21
Publicité
Table des Matières
