Instèllètion; Installation And Replacing Of The Tèsteguèrd Filter; Teêhniêèl Informètion; Technical Data - Electrolux SB315N Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

58
www.electrolux.com
7. INSTèLLèTION
WARNING!
Refer to Safety chapters.
7.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
élimate
class
SN
N
ST
T
7.2 Electrical connection
• éefore plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.ê.
Directives.
8. TEêHNIêèL INFORMèTION

8.1 Technical data

Height
Width
Depth
Rising time
Ambient temperature
+10°ê to + 32°ê
+16°ê to + 32°ê
+16°ê to + 38°ê
+16°ê to + 43°ê
1840 mm
595 mm
642 mm
17 h
7.3 Installation of the appliance
and door reversal
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
7.4 Installation and replacing of
the TèSTEGUèRD filter
On delivery the carbon filter is in a plastic
bag to preserve performance. The filter
should be placed in the drawer before the
appliance is turned on.
1. Open the drawer.
2. Take the filter out of the plastic bag.
3. Insert the filter in the drawer.
4. êlose the drawer.
To get the best performance the carbon
air filter should be changed once every
year.
New active air filters can be purchased
from your local dealer.
The air filter is a consumable
accessory and as such is not
covered by the guarantee.
Voltage
Frequency
The technical information are situated in
the rating plate, on the external or internal
side of the appliance and in the energy
label.
230 - 240 V
50 Hz

Publicité

Table des Matières
loading

Table des Matières