Trouéleshooting - Electrolux SB315N Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

56
www.electrolux.com
6. TROUéLESHOOTING
WARNING!
Refer to Safety chapters.
6.1 What to do if...
Problem
The appliance is noisy.
èudible or visual alarm is
on.
è square symbol is shown
instead of numbers on the
Temperature Display.
The lamp does not work.
The lamp does not work.
The compressor operates
continually.
The compressor does not
start immediately after
pressing the FastFreeze, or
after changing the temper-
ature.
Possible cause
The appliance is not sup-
ported properly.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
The temperature in the ap-
pliance is too high.
Temperature sensor prob-
lem.
The lamp is in stand-by.
The lamp is defective.
Temperature is set incor-
rectly.
Many food products were
put in at the same time.
The room temperature is
too high.
Food products placed in
the appliance were too
warm.
The FastFreeze function is
switched on.
The ShoppingMode func-
tion is switched on.
This is normal, no error
has occurred.
Solution
êheck if the appliance stands
stable.
Refer to "Door Open èlarm"or
"High Temperature èlarm".
Refer to "Door Open èlarm"or
"High Temperature èlarm".
êontact the nearest èuthor-
ised Service êentre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
êlose and open the door.
êontact the nearest èuthor-
ised Service êentre.
Refer to "Operation" chapter.
Wait some hours and then
check the temperature again.
Refer to climate class chart
on the rating plate.
èllow food products to cool
to room temperature before
storing.
Refer to "FastFreeze func-
tion".
Refer to "ShoppingMode
function".
The compressor starts after a
period of time.

Publicité

Table des Matières
loading

Table des Matières