brondell H2O+ CORAL UC300 Manuel De L'utilisateur page 15

STEP 4: INSTALLING THE FILTERS
NOTE: For purchasers of the Coral UC300, it is very important to install the filters in the correct
order. Simply match the same label colors to the filter head labels. From left-to-right, the
proper order is
1) Sediment filter
2) Pre-Carbon filter
3) Carbon Block filter
1. To insert the filters, first line up the arrow on the filter head
with the arrow on the filter
2. With the top and bottom arrows
still lined up, insert the top
of the filter into the housing
and turn 90 degrees to the
right, until the filter will not
turn any more.
The Filter Head arrow should
now be lined up with the "Circle"
icon and notch on the top
of the filter.
3. For UC300 – Repeat the process for the Pre-Carbon filter and Carbon Block filter.
For UC100 – This process is complete.
UC300
water inlet
UC100
water outlet
13