brondell H2O+ CORAL UC300 Manuel De L'utilisateur page 20

Masquer les pouces Voir aussi pour H2O+ CORAL UC300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE (cont.)
REPLACING THE FILTERS (cont.)
6. Replace the battery in the faucet LED indicator to reset
the filter change reminder. The battery type is CR2032
and Brondell provides one with every set of UF-35 and
UF-15 filters.
a. Under the faucet handle, locate the black rubber battery
compartment. Grasp it from the sides and pull down as
shown.
b. Remove the old battery from the compartment by lifting
the silver metal tab and sliding the battery out of the
rubber casing. Wait 30 seconds for the residual energy to
drain to reset the indicator.
c. Replace with a new CR2032 battery by sliding the battery
under the silver tab, making sure that the words on the
battery are facing out. A fresh CR2032 battery comes with
every UF-35 and UF-15 Replacement Filter pack.
d. Push the black rubber battery compartment back up into
the faucet handle.
e. The indicator will blink red once, blue once, and then the
indicator will function as normal.
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

H2o+ coral uc100Coral uc300Coral uc100

Table des Matières