Axis Communications 210 Guide D'installation page 6

Page 6
AXIS IP Utility
AXIS IP Utility is a free Windows
application that discovers and displays
Axis devices on your network.
The application can also be used to
manually set a static IP address.
Note that you must install the network
camera on the same network segment
(physical subnet) as the computer
running AXIS IP Utility.
AXIS IP Utility is available on the CD supplied with this product, or it can be downloaded from
www.axis.com/techsup
Automatic discovery
1. Check that the network camera is connected to the network and that power has been
applied.
2. Start AXIS IP Utility. When the network camera appears in the window, double-click it to
open the camera's home page.
3. See page 9 for instructions on how to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your computer is connected
to.
2. Click the button
IP address for the network camera. The serial number (S/N) is located on the camera's
underside label (see page 4).
3. Click the Set IP button and then restart the network camera (within 2 minutes).
4. Click View Home Page to access the network camera's web pages.
5. See page 9 for instructions on how to set the password.
Note:
AXIS IP Utility can be used to change a dynamically set IP address to a static one.
(Set IP address using serial number) and enter the serial number and
AXIS 210/211/211A Installation Guide