SOLAC BA5602 PRO 800 Mode D'emploi page 11

by using the speed regulator control (A). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
TURBO FUNCTION:
The appliance has a Turbo function. By acti-
•
vating the Turbo function (B2) all the power of
the motor becomes available, thus obtaining a
finer finish in the final texture of the product.
ONCE YOU HAVE FINISHED USING THE AP-
PLIANCE:
Stop the appliance by releasing the pressure
•
on the on/off button.
Unplug the appliance from the mains.
•
Clean the appliance.
•
ACCESSORIES:
STICK BLENDER ACCESSORY (FIG.1):
This accessory is used for making sauces,
•
soups, mayonnaise, milkshakes, baby food ...
Attach the stick to motor body by pressing until
•
you hear a click (Fig.1.1).
Put the food to be prepared in the jar and
•
switch the appliance on.
Detach the stick to motor body by pressing un-
•
til you hear a click (Fig.1.2).
CHOPPING ACCESSORY (FIG.2):
This accessory is used to chop vegetables or
•
meat...
Put blades set and and the food to be prepared
•
in the chopping container. (Fig.2.1 / 2.2).
Put the globet adapter fitting in the chopper un-
•
til it clicks into place. (Fig.2.3).
Attach the unit to the cover pressing until you
•
hear the click and switch the appliance on (be
careful: do not switch the appliance on if the
whole unit is not properly fitted and connected
together). (Fig.2.4).
Stop the appliance when the food reaches the
•
desired texture.
Detach the unit from the cover and press the
•
accessory release buttons to free the adapter
fitting .
NOTE 1: not to exceed half of the chopper cup
•
when working with solid foods.
NOTE 2: In the case of working with liquid
•
foods, do not exceed 300 ml.
CLEANING
Disconnect the appliance from the mains and
•
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
•
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
•
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
Never submerge the appliance in water or any
•
other liquid or place it under running water.
During the cleaning process, take special care
•
with the blades, as they are very sharp.
It is advisable to clean the appliance regularly
•
and remove any food remains.
If the appliance is not in good condition of
•
cleanliness, its surface may degrade and in-
exorably affect the duration of the appliance's
useful life and could become unsafe to use.
The following pieces may be washed in a dish-
•
washer (using a soft cleaning program):
- Measuring cup
- Chopper cup
The draining/drying position of the articles
•
washable in the dishwasher or in the sink must
allow the water to drain away easily.
Then dry all parts before its assembly and stor-
•
age.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
•
support service if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
THE CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
•
appliance consists are included in a collection,
classification and recycling system. Should
you wish to dispose of them, use the appropri-
ate public containers for each type of material.
The product does not contain concentrations
•
of substances that could be considered harm-
ful to the environment
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of waste
electrical and electronic equipment (WEEE)
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU
on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for ener-
gy-related products
EN