Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8520892
CUTTING TOOL PRECAUTIONS
WARNING! Some surfaces contain materials which can be toxic. When
working on materials that may contain lead, asbestos, copper chromium
arsenate or other toxic materials, extra care should be taken to avoid
inhalation and minimize skin contact.
The term blade is used to represent a cutting blade, cutting wheel or a cutting bit.
1. Keep hands away from the cutting area and the blade.
2. Do not touch the blade or the workpiece surface cut with this tool. They
may be hot and could inflict a burn injury.
3. Use the correct mounting hardware. The mounting hardware is designed to
hold the cutting blade on the tool to allow optimum performance and safety
of operation. Mismatched mounting hardware may result in a tool
malfunction and cause an injury.
4. Use extra caution when making a 'plunge cut' into existing walls or other
blind areas. The protruding blade may cut objects that can cause kickback,
cut an electrical wire or a water pipe.
5. Only use a blade that exceeds the maximum BPM of the tool (see Specifications).
POWER CORD
1.
Insert the power cord plug directly to the power supply whenever possible.
Use extension cords or surge protectors only when the tool's power cord
cannot reach a power supply from the work area.
a.
When operating a power tool outside, use an outdoor extension cord
marked W-A or W. These cords are rated for outdoor use and reduce
the risk of electric shock.
b.
Use in conjunction with a Ground Fault Circuit Interrupter (GFCI). If
operating a power tool in a damp location is unavoidable, the use of a
GFCI reduces the risk of electric shock. It is recommended that the
GFCI should have a rated residual current of 30 mA or less.
2.
Do not operate this tool if the power cord is frayed or damaged as an
electric shock may occur, resulting in personal injury or property damage.
a.
Inspect the tool's power cord for cracks, fraying or other faults in the
insulation or plug before each use.
6
120V AC Electric Jackhammer Kit
For technical questions call 1-800-665-8685
V4.5
Publicité
Table des Matières
