V4.5
WARNING! This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
CAUTION!
This notice indicates a potentially hazardous situation that may result
in minor or moderate injury if proper practices are not taken.
NOTICE!
This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment away from the
work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the reach
of children.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes.
a.
Eye protection equipment should comply with ANSI Z87.1 standards.
2.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
3.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
4.
Steel toe footwear or steel toe caps to prevent injury from falling objects.
5.
Wear protective clothing designed for the work environment and tool.
6.
Wear the appropriate rated dust mask or respirator.
Visit www.princessauto.com for more information
120V AC Electric Jackhammer Kit
8520892
3