HP Ink Tank 310 Serie Mode D'emploi page 3

Masquer les pouces Voir aussi pour Ink Tank 310 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important Ink Information
After you have set up the printer, do not open the printhead latch unless you are installing new printheads or
moving the printer outside your home or office. In addition, you should maintain proper ink levels in the ink tanks
when printing.
Maintain proper ink levels
Use the ink level lines on the ink tanks to determine when to fill the tanks and how much ink should be added.
Never print when any of the ink tanks has less than the minimum amount of ink. Printing with too little ink or filling
tanks with too much ink can damage the printer and affect print quality. Make sure you match the color of the ink to
the color on the ink tank when you refill an ink tank. See the Start here booklet for instructions on how to fill the ink
tanks.
NOTE: Product service or repairs required as a result of filling the ink tanks improperly and/or using non-HP ink will
not be covered under warranty.
Moving printer after setup
To prevent damage to the printer or ink leakage, follow these instructions.
If you are moving the printer within your home or office, keep the printhead latch closed, and keep the printer level.
If you are moving the printer outside your home or office, visit www.support.hp.com or contact HP.
Basic troubleshooting
• Make sure you have installed the latest printer software from 123.hp.com.
• If using a USB cable, make sure the cable is securely connected and the printer is set as the default printer.
Note for Windows® users: You may also order a printer software CD. Please visit www.support.hp.com.
Visit HP Diagnostic Tools at www.hp.com/go/tools to fix common printer problems.
Learn more
Product support
www.hp.com/support/it310
  
Minimum ink level
Ink level should never go below the minimum ink line.
Printing with ink level below the minimum line may cause
damage to your printer.
  
Maximum ink level
Do not fill ink above the maximum ink line. Overfilling
might cause ink leakage. When you refill, some ink might
be left in the ink bottle. You can save the remaining ink by
storing the ink bottle in a dry cool place for future refilling.
HP mobile printing
www.hp.com/go/mobileprinting
Get additional help and find notices, environmental,
and regulatory information, including the European
Union Regulatory Notice, North America EMC, Wireless
and Telecom statements, and other compliance
statements, in the "Technical Information" section of
the User Guide: www.hp.com/support/it310.
Printer registration: www.register.hp.com.
Declaration of Conformity: www.hp.eu/certificates.
Ink usage: www.hp.com/go/inkusage.
3

Publicité

Table des Matières
loading

Table des Matières