1624634_FloorWasherCS930.qxp_English 2/2/21 3:53 PM Page 8
M INTEN NCE: DIRTY W TER T NK
To release dirty water tank, press down
on recessed button on the top of the
dirty tank.
Grasp lid of dirty water tank in recessed
areas on each side of the filter and pull
upward to remove the lid of the tank.
After daily use, remove the filter from the
lid of the dirty water tank by pulling it up.
8 www.sanitairecommercial.com
Grab the front handle while pressing down
on button and pull dirty water tank away
from the floor washer.
Pour dirty water out. Rinse the inside of
the dirty water tank.
6
Hand wash the filter and screen with
warm water and mild detergent.