Sanitaire HydroClean SC930 Guide De L'utilisateur page 11

1624634_FloorWasherCS930.qxp_English 2/2/21 3:53 PM Page 11
M INTEN NCE: ELECTRONIC LERTS
Indicator lights to alert when dirty water tank is full, filter is clogged, solution tank
is empty and improper installation of the filter or brush roll.
1
3
Dirty water tank full
indicators
When dirty water tank
is FULL, the full tank
indicator located on
carry handle will start
blinking, then change
to a solid amber color
and floor washer will
shut off.
Go to MAINTENANCE:
DIRTY WATER TANK,
pages 8-9.
Incorrect or missing
filter indicators
If filter is missing,
incorrectly aligned or
not a genuine Sanitaire
replacement, the full
tank indicator located
on carry handle will
start blinking, then
change to a solid
amber color and
floor washer will not
turn on.
2
Empty solution tank
indicators
When the solution tank
is EMPTY, the empty
solution tank indicator
located on carry
handle will start
blinking, then change
to a solid amber color.
Turn floor washer off.
Go to FILLING THE
SOLUTION TANK,
page 6.
4
Incorrect or missing
brush roll indicators
If brush roll is missing, incorrectly aligned
or not a genuine Sanitaire replacement, the
pump activation lights located in the nozzle
will start blinking then change to solid white.
A red indicator light will light on handle and
floor washer will not turn on.
1-800-800-8975 11