Maintenance: Dirty Water Tank - Sanitaire HydroClean SC930 Guide De L'utilisateur

1624634_FloorWasherCS930.qxp_English 2/2/21 3:53 PM Page 10
M INTEN NCE: SELF-CLE NING FUNCTION
1
60 seconds
Self-cleaning indicator
After use, place handle in upright position
and depress the self-clean button. The
indicator light will blink for 60 seconds
while clean solution is dispensed on the
brush roll and vacuumed back into the dirty
water tank. Floor washer will shut off when
cycle is complete. Repeat as necessary.
Empty dirty water tank when finished.
3
45 seconds
45 second dry cycle
Pump activation lights OFF. No solution
flowing on brush roll.
NOTE:
Store floor washer in a protected, dry area. Since this product uses water, it
must not be stored where there is a danger of freezing. FREEZING WILL DAMAGE
INTERNAL COMPONENTS AND VOID THE WARRANTY.
10 www.sanitairecommercial.com
2
15 seconds
15 second wash cycle
Pump activation lights ON. Solution will
flow on brush roll.
4
Empty dirty water tank
SEE MAINTENANCE: DIRTY WATER TANK,
pages 8-9.