Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. Remove Fascia (for Buick Enclave) – (a) Using a T15 torxbit remove (2) screws at the bottom of fascia. (b) Using a flat head screwdriver remove (2) bolt covers and
using 7 mm socket remove those (2) bolts just below the taillight, per side. (c) Using a T20 torxbit remove (1) screw below taillight, per side. (d) Using a T15 torxbit
remove (4) screws from wheel well liner, per side. (e) Using a 7 mm socket remove (1) vertically attached bolt under wheel well liner, per side. (f) Starting from the
wheel well gently pull off the fascia. Unplug any wires/electric harness that are attached while removing the fascia.
(b)
(c)
(a)
(d)
(e)
(f)
©2022 Horizon Global™ Corp - Printed in Mexico
Sheet 5 of 21
76184NP
03-08-22
Rev. C
Publicité
Table des Matières
