Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Website:
www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
4500 lb. (2043 Kg)
Weight Distributing
4500 lb. (2043 Kg)
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2017, 2021 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76192, 84192, CQT76192
Max Tongue
Weight
Weight
675 lb. (306 Kg)
675 lb. (306 Kg)
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in Stelvioance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 15
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
76192NP
03-19-21
Rev. B

Publicité

Table des Matières
loading

Sommaire des Matières pour Horizon Global 76192

  • Page 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear •...
  • Page 2: Installation Instructions

    Max Tongue Weight Weight Carrying 4500 lb. (2043 Kg) 675 lb. (306 Kg) Weight Distributing 4500 lb. (2043 Kg) 675 lb. (306 Kg) Hitch Illustration ©2017, 2021 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 15 76192NP 03-19-21 Rev. B...
  • Page 3 Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2017, 2021 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 15...
  • Page 4 Re-install exhaust - Raise exhaust into position, install the bolts removed from the hangers earlier. ©2017, 2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 15 76192NP 03-19-21 Rev.
  • Page 5 Remove the hangers earlier. pull wires and loosely install conical washer ③ and hex nut ④ to hitch. ©2017, 2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 15 76192NP 03-19-21 Rev.
  • Page 6: Garantie À Vie Limitée

    GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de matières et de fabrication, exception faite de l’usure normale.
  • Page 7: Équipement Requis

    4500 lb. (2043 Kg) 675 lb. (306 Kg) Sans répartition de charge 4500 lb. (2043 Kg) 675 lb. (306 Kg) Répartition de charge Illustration de l'attelage ©2017, 2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 7 de 15 76192NP 03-19-21 Rev. B...
  • Page 8 être enlevés et remplacés. Observer les mesures de sécurité appropriées en travaillant sous le véhicule et porter des lunettes de protection. Ne jamais utiliser une torche pour découper un accès ou un trou de fixation. Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. ©2017, 2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 8 de 15...
  • Page 9 écrous à souder existants du véhicule et poser les boulons retirés véhicule lors du remorquage. précédemment. Réinstaller l'échappement - Soulever l'échappement en position, poser les boulons retirés des supports plus tôt. ©2017, 2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 9 de 15 76192NP 03-19-21 Rev. B...
  • Page 10 Retirez les fils de traction et installez sans les serrer la rondelle conique ③ et l’écrou hexagonal ④ sur l’attelage. ©2017, 2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 10 de 15 76192NP 03-19-21 Rev.
  • Page 11: Garantía Limitada De Por Vida

    TechnicalSupport@horizonglobal.com GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará libre de defectos significativos tanto en materiales como en mano de obra, con la excepción del desgaste...
  • Page 12: Equipo Necesario

    Carga de peso 4500 lb. (2043 Kg) 675 lb. (306 Kg) 4500 lb. (2043 Kg) 675 lb. (306 Kg) Distribución de peso Ilustración del enganche ©2017, 2021 Horizon Global™ Corp. Impreso en México Hoja 12 de 15 76192NP 03-19-21 Rev. B...
  • Page 13 Kit de fijadores: 76192F Siempre usar GAFAS DE SEGURIDAD Instrucciones de instalación al instalar el enganche ① Qty. (4) Perno de carruaje NÚMEROS DE PARTE : 76192, 84192, CQT76192 7/16’’-14 x 1.75, GR5 Tuercas de ② Qty. (4) Espaciador soldar Larguero del .875 x 2.00 x .109...
  • Page 14 Volver a instalar el escape - Levantar el escape a su posición, instalar los pernos que se retiraron anteriormente de los colgantes. ©2017, 2021 Horizon Global™ Corp. Impreso en México Hoja 14 de 15 76192NP 03-19-21 Rev.
  • Page 15 Retirar los cables de insertar y sin apretar instalar la arandela cónica ③ y la tuerca hexagonal ④ en el enganche. ©2017, 2021 Horizon Global™ Corp. Impreso en México Hoja 15 de 15 76192NP 03-19-21 Rev.

Ce manuel est également adapté pour:

84192Cqt76192

Table des Matières