Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Remove Fascia (for Chevrolet Traverse) – (a) Open the tailgate. Pry open (4) plastic covers below taillights remove the (4) screws using a 7mm socket, (2) each side.
(b) Remove (2) screws that connect the bottom lower edge of the fascia to the metal support tabs using a T20 socket. (c) Remove (8) screws that connect the wheel
well liner to the fascia using T15 socket, (4) each side. Gently pull back the wheel well trim, remove (2) screws that connect the fascia to the vehicle body with a 7mm
socket, (1) each side. (d) Starting from the wheel well gently pull off fascia. Unplug any wires that are attached.
©2022 Horizon Global™ Corp - Printed in Mexico
(a)
(c)
(a)
(d)
Sheet 4 of 21
76184NP
(b)
(d)
03-08-22
Rev. C
Publicité
Table des Matières
