Basic Functions - Caliber RMD 806BT Guide De Démarrage Rapide

QUICKSTARTGUIDE
Unit buttons and connections:
IR
MIC
BND
AUX
9
10
SD USB

Basic functions

Home screen
Push the [HOME] button (7) to show the main menu. On the home
screen you can choose the available modes (RADIO / USB / SD /
bluetooth / AUX) or enter the SETUP / EQ menu.
Sound Control
• Volume
Turn the [VOL] button (6) to adjust the volume level.
• Audio settings
Push the home button and choose EQ from the main menu to go
to audio settings. Here you can find preset equalizer, loudness etc.
Day/night display mode
Tap the on-screen Sun/moon button in the bottom left of the main menu
to de/in-crease brightness.
Tap again to reduce brightness during night time.
Tap again to black out the screen.
Setup
Enter the setup menu by tapping the [SETUP] icon on the main menu.
Tap the items you would like to set. You can adjust audio, date and time,
language, calibration, etc.
Radio opations
Band
Tap the [BND] button to choose FM1, FM2, FM3, AM1 or AM2. On each
band up to 6 presets can be stored.
Radio Seek Function
In Radio Mode, touch and hold the a or d button to adjust seek the
frequency automatically. Tap the button to adjust the radio frequency
manually step-by-step.
Save preset stations
There are six numbered preset buttons on the screen (e.g: 87.50,
98.00), which can store and recall stations for each band. Tune in
to the station you want to store, touch and hold any key from the
'preset buttons' until you hear a beep. The station will be saved in the
designated number.
RDS
AF, TA, PTY are the RDS functions. Tap the on-screen buttons to make
use of them.
Note: RDS might not be available in every country.
1. Display:
6.2" TFT-LCD touch screen
2. Reset
Reset to factory settings
3. IR sensor:
Remote control IR sensor
4. Mic
Built-in microphone
5. BND:
Change the band AM/FM
6. VOL/SEL: - Rotate for volume adjustment or adjust settings
- Push to enter the audio menu
When ON, press once to turn the display OFF
(During TFT off, the video out signal will be available so that the
connected monitor will show the screen of the unit.)
Press the button again to turn the display back ON
Press and hold the button again to turn the unit OFF
7. HOME: Go to "HOME"-screen (main menu)
8. AUX:
3.5mm Jack-in
9. SD:
Micro SD card reader
10. USB:
Standard USB port
Bluetooth function operations
Pairing
Activate bluetooth on your mobile phone, and search for available
devices. Select "RMD806BT_CAL", password "0000".
If successfully connected the name of the connected device will appear
on screen
Dial pad
Touch the dial pad to dial the number you would like to call. Touch the
[CALL] (green) button to send the number.
Call list
'refresh' button to load your phone's phonebook.
A2DP
Press the [MUSIC
of your cell phone using the on-screen controls.
Incoming calls
• Answer call:
• End call:
• Reject call:
USB/SD operations
Plug the USB/SD card into the USB/SD port. The unit will start playing
the contents automatically.
Audio playback
To control the audio playback, use the on-screen buttons.
Mirror Link
Connecting way
• Connect the phone with a USB data cable to the device.
• Your phone will automatically prompt you to download the correct app
Note: Some bigger format phones cannot be connected due to screen
incompatibilities. More details can be found in our online full manual
(max. 32GB)
(max. 32GB)
Displays your phonebook if you've given permission. Hit the
] button to enter the page to control playing music
push the green horn at an incoming call
push the red horn
push the red horn at an incoming call