Hour Meter - Husqvarna Rider 322T AWD Manuel D'utilisation

Electrical system overview
1. Battery
2. Main fuse
3. Seat safety switch
4. Headlights
5. Microswitch, parking brake
6. Safety switch for the lift lever
7. Ignition lock

8. Hour meter

Seat safety switch
The seat safety switch starts the safety circuit when the
operator lifts from the seat. The engine and the drive to
the blades stop if the blades are engaged or the parking
brake is not applied. See also
10 .
Hour meter
The hour meter shows how many hours the engine has
run. The time with ignition on but engine off is not
registered. The last digit shows tenths of an hour (6
minutes).
4
8
7
6
Safety circuit on page
1
2
Forward and reverse pedals
The speed is steplessly adjusted with two pedals. Pedal
(1) is used to move forward, and pedal (2) to reverse.
The product brakes when the pedals are released.
Cutting deck
The cutting decks for this product are Combi cutting
decks and an SD cutting deck.
The Combi cutting decks have the BioClip function,
which cuts the grass into fertilizer. The Combi cutting
decks can also be used without BioClip. Without BioClip
the grass is ejected to the rear.
The SD (side discharge) cutting deck ejects the cut
grass to the side.
3
4
5
1
2
270 - 001 - 28.11.2017