Publicité
Les langues disponibles
Les langues disponibles
Fig. 1A
CAUTION: The chain brake should not be used for
starting and stopping the chainsaw during normal operation.
CHAIN BRAKE TEST
Before cutting with your chainsaw, the chain brake should be
tested as follows:
A. Make sure the chain brake is disengaged (Fig. 1A).
B. Place the chainsaw on a firm, flat, dry surface that is clear
of any debris. Do not let the chainsaw come into contact
with any objects.
C. Plug the chainsaw into a power source.
D. Grasp the front handle (not the chain brake / hand guard
lever) with your left hand. Thumb and fingers should
encircle the handle.
E. Grasp the rear handle with your right hand. Thumb and
fingers should encircle the handle.
F. Depress the LOCK/OFF button with your right thumb.
Squeeze the trigger with your index finger.
G. While the motor is running, activate the chain brake by
rolling your left hand forward against the lever.
H. Chain and motor should stop abruptly.
Fig. 1B
12
Publicité
