oneConcept 10013203 Mode D'emploi page 15

Dispensing water
1. Autodispense water outlet
a) Press the "UNLOCK" button ONCE. The "UNLOCK" indicator light will come on.
b) Push the "AUTO DISPENSE" button to dispense hot water.
2. Cup water oulet
a) Press the "UNLOCK" button ONCE. The "UNLOCK" indicator light will come on.
b) Use cup mouth touch<cup switch>water outlet at once.
Note:
If the dispense button is not selected within 10 seconds after selecting the UNLOCK
button, the appliance will automatically revert back to the LOCK position.
The dispensing function will NOT operate if the electric air pot is not connected to the
main switch and Power switched ON.
Using the keep warm temp set
Press the "SELECT" button to select your ideal temperature. You can go through the tem-
perature settings as inidicated below:
98 °C  85 °C  60 °C  50 °C  40 °C
Primary setting at 85° Celsius.
• When the keep warm settings are set at 98°C, 85 °C, 60 °C, 50 °C, 40 °C Keep warm LED
with be lit after boiling. If the water temperature is below the selected settings, water will
be boiled again and boiling LED will be it.
• Temperature can be reset during warm keeping. (The device will RE-BOIL automatically
according to different hot water temperature.
98°C
85°C
50/60°C
40°C
Notes:
Always keep the lid away from you as there is hot steam trapped under the lid. Do not
press the dispensing button when the inner water reservoir is empty.(Doing so can
cause damage.)
Suitable for cooking hot instant food and for hot beverages such
as chocolate drinks.(always return setting to 85 °C after used.)
Suitable for tea or coffee preparation at economical temperature.
Suitable for instant milk formulas and taking medication.
Warm water
15