Operation - oneConcept 10013203 Mode D'emploi

Opening top lid
Push down front edge of TOP COVER LOCK
FLAP located at the lid. Lift up back by po-
tion pulling upwards to open the top cover.
Removing top lid
Lift top lid to about 45 °C angle, press the
UNLOCK button located at the rear of the
top cover and pull upwards at 45 °C.
Caution: Danger of Scalding
Water may still be hot and hot vapor may escape.
Filling and refilling
1. Open the Top Cover as the above instruction. Using another container, fill water into
the Inner pot until the FULL mark is reached.
Do not over fill as hot water may splash out during boiling.
2. Close top cover, ensure lid is secured by pressing firmly down till "click" sound is heard.
Boil water
After power is switched ON, water will start to boil immediately.
• Do not open top cover when water is boiling.
• Do not add water when appliance is still boiling.
• Do not obstruct the top lid steam vent.

Operation

13