Automatic Switching Off - oneConcept 10013203 Mode D'emploi

Boiling LED
Keep warm
• Beeper will sound 5 times when water is boiled. Keep warm LED will be lit.
• Press RE-BOIL button if added water is not sufficient to allow unit to boil automatically.

Automatic switching off

In the event that the water runs dry, the auto CUT-OFF function of this electric air pot
would be activated. The power source would be CUT-OFF. At the same time, the beeper
sounds and a sign is displayed on the LCD panel. The "REFILL"LED will also be lit.
Re-boil function
1. Press "RE-BOIL" button once. Re-boing indicator light will come ON.
2. After RE-BOIL is completed, the KEEP WARM indicator light will turn on.
Re-boil will not function if there is insufficient water inside.
Press the RE-BOIL button immediately after the water had just reached boiling level will
have no effect as the water is already at 100 °C.
14
Keep warm LED lit
LCD indicates water
temperature
LCD indicates water
Keep warm
temperature
Keep warm
temperature
selection