Publicité
Les langues disponibles
Les langues disponibles
Installation/Connection
Wiring connection
Fuse (10 A)
Ignition switch
Car fuse block
Separate red wire
Make this connection if your vehicle
factory wiring harness does not have
"12 V ignition switch" wire.
42
ENGLISH
Light blue/yellow
Join the same color wires together.
Blue/white: Remote (12 V
350 mA)
Orange/white: Illumination
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Gray/black
White: Front speaker/For 3-way crossover: Mid range speaker (left)
White/black
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
Green: Rear speaker */For 3-way crossover: Tweeter (left)
Green/black *
IMPORTANT
We recommend installing the unit with a commercially available custom wiring harness specific
for your car and leave this job to professionals for your safety. Consult your car audio dealer.
Antenna terminal
To the steering wheel
remote control adapter
Blue: To power antenna
Blue/white: To amplifier
(Not used)
Vehicle
dashboard
Factory wiring
harness (vehicle)
Custom wiring harness
(separately purchased)
Brown
* You can also connect a
subwoofer speaker directly
using this lead without an
external subwoofer amplifier.
For setting, see page 29.
Recommended connection
Publicité
