Lubrication - Panasonic ER-GB370 Mode D'emploi

2. Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
3. Apply the oil to the blade after
drying. (See this page.)
4. Attach the blade and comb
attachment to the trimmer.
Cleaning with the brush
1. Brush off any hair trimmings from
the main body and from around
the blade.
2. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise
the moving blade.
3. Apply the oil to the blade.
4. Attach the blade and comb attachment to the trimmer.
PB013743 - ER-GB370 _(01EN)_07-22-16.indd 13

Lubrication

Apply the oil to the trimmer
before and after each use.
Apply a drop of the oil to
the points indicated by the
arrows.
Remounting the blade
Fit the mounting hook into
the blade mounting on the
trimmer and then push in
until you hear a click.
13
2016/7/22 10:31:31