MSI 880GM-E35 Mode D'emploi page 20

MS-7641
tPm module connector: JtPm
this connector connects to a tPm (trusted Platform module) module. Please re-
fer to the tPm security platform manual for more details and usages.
Chassis intrusion Connector: JCi
this connector connects to the chassis intrusion switch cable. if the chassis is
opened, the chassis intrusion mechanism will be activated. the system will record
this status and show a warning message on the screen. to clear the warning, you
must enter the BioS utility and clear the record.
Clear CmoS Jumper: JBat
there is a CmoS Ram on board with an external battery power supply to preserve
the system configuration data. With the CmoS Ram, the system can automatically
boot oS every time it is turned on. if you want to clear the system configuration,
set the jumper to clear data.
JBat
1 1
1
keep data Clear data
imPoRtant
you can clear CmoS by shorting 2- pin while the system is off. then return to
-2 pin position. avoid clearing the CmoS while the system is on; it will damage
the mainboard.
9