Parts And Components; Before Use - cecotec ROCK'NGRILL 2000 Manuel D'instructions

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1.
1. Handle
2. Lock and support
3. Power light indicator
4. Ready light indicator
5. Temperature knob
6. 180º release button
7. Grease nozzle
8. Cooking plates
9. Drip tray

2. BEFORE USE

- This product includes a safety package to protect it during transport. Unpack the appliance
and keep the original packaging and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future. In case the original packaging
is disposed of, make sure all packaging materials are recycled accordingly.
- Clean the cooking plates with a wet sponge or cloth.
- Dry the plates with a cloth or paper towel.
- For optimal results, cover both plates with some oil.
Note
You may notice a slight burning smell or smoke when using the sandwich maker for the first
time, caused by the excess of lubricants from the manufacturing process. This does not affect
the safety of your appliance.
3. OPERATION
1. Close the press grill and plug it to the mains supply. You will notice that the red power
light turns on, indicating that the grill is on.
2.
Turn the temperature dial clockwise to adjust the temperature to your desired liking. Try a
middle setting at first, and adjust the temperature to your liking in later uses.
3. The green indicator light will turn on, indicating that the grill is preheating. It will take
around 3-5 minutes to reach cooking temperature. The green light will turn off when the
temperature is reached.
4. The grill is ready for use.
ROCK'N GRILL 2000
32