Concept VP4201 Mode D'emploi page 47

USING THE HAND-HELD VACUUM CLEANER
1. To separate the hand-held vacuum cleaner from the main unit, grasp the handle of the hand-held vacuum cleaner
with one hand and press the release button with the thumb of the other hand.
2. To switch on the vacuum cleaner, slide the power button to the "on" position.
3. Move the nozzle of the vacuum cleaner back and forth over the surface you wish to vacuum. Do not put too much
pressure on the nozzle and allow it to vacuum all dust and dirt.
4. The slotted nozzle can be used to vacuum hard-to-reach places, such as the sides of a chair. To use the slotted
attachment, simply insert it into the nozzle of the hand-held vacuum cleaner (Fig. 3).
5. To attach the brush to the slotted attachment, press the "PRESS" button (Fig. 4).
6. Slide the brush onto the slotted nozzle until it clicks into place.
7. We recommend emptying the dirt container before each use of the vacuum cleaner.
m
.
USE OF THE MOP
1. Open the sealing cap (Fig. 5).
2. Fill with water. Pure disinfection without additives and essential oils can be used (Fig. 6).
3. Put on the mop fabric (Fig. 7).
4. Put the vacuum cleaner on the water tank (Fig. 8).
5. Use the toggle button (E) to wet the mop fabric as needed.
1 VP4201
CVAK
Fig. 1
Fig. 5
CVAK
Fig. 2
Fig. 6
Fig. 3
Fig. 7 Fig. 8
EN
Fig. 4
47