Installation - IFM efector 500 PF30 Notice Utilisateurs

3. Installation

Before mounting and removing the sensor, make sure that no
pressure is applied to the system.
The unit is adaptable for various
process fittings. ifm adapters to
be ordered separately as acces-
sories.
The housing (A) is freely rotat-
able.
Prozess adapter:
Mount adapter (C) to the sensor
first, then sensor + adapter to
the process connection by means
of a nut, a clamping flange or
similar (B).
If it is not possible to slide the fixing element (B) down over the top of
the sensor: slide it up over the bottom of the sensor before the
adapter is mounted.
Sensor and adapter are only to be mounted once.
If it is not possible to slide the fixing element (B) down over the top of
the sensor: slide it up over the bottom of the sensor before the
adapter is mounted.
Welding adapter:
Weld the adapter first. Then mount the sensor.
20
A
B
C