Product Overview - V7 UPS1DT750-1E Installation Et Utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

English

Installation & Operation

1. Inspection

The following items are inside the box: UPS Unit, User Manual

• Remove the UPS from its package and inspect it for damage that may have occurred during shipping. If any

damage is discovered, re-pack the unit and return it to the place of purchase.

2. Connect to Utility Power

• Connect AC power cord to utility power. Then, the UPS will start to charge inside battery. For best result,

charge the battery for 6 hours prior to initial use.

3. Plug in Equipment

• Battery back-up Outlets (3)

• Connect computer and monitor to the "Battery Backup" outlets. These outlets provide battery backup, EMI

filtering, line conditioning, and surge protection. Battery power is automatically provided in case of power

failure.

• Surge-Protected Outlets (3)

• Connect a printer, fax machine, or scanner to the "Surge-protected" outlets. These outlets do not provide

power during power failure.

CAUTION: NEVER connect a laser printer or scanner to the battery backup sockets of UPS. The equipment

may draw too much power and overload the UPS

4. Turn On/Off the UPS

•

To turn on the UPS unit, press the power switch lightly. Then, the LED or LCD will light up. To turn off the

UPS unit, press the power switch again. The display will shut off.

5. Install software (Optional for advanced users)

For optimal computer system protection, install UPS monitoring software to fully configure the UPS system.

Please follow steps below to download and install monitoring software.

1. Go to the website http://www.V7-world.com/downloads

2. Select ViewPower software for your operating system to download the software.

3. Follow the on-screen instructions to install the software.