Product Overview - V7 UPS1TW1500-1E Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

English

Installation & Operation

1. Inspection

The following items are inside the box: UPS Unit, User Manual

• Remove the UPS from its package and inspect it for damage that may have occurred during

shipping. If any damage is discovered, re-pack the unit and return it to the place of purchase.

2. Connect to Utility Power

• Connect AC power cord to utility power. Then, the UPS will start to charge inside battery. For best

result, charge the battery for 6 hours prior to initial use.

3. Plug in Equipment

• Battery back-up Outlets (4)

• Connect computer and monitor to the "Battery Backup" outlets. These outlets provide battery

backup, EMI filtering, line conditioning, and surge protection. Battery power is automatically

provided in case of power failure.

• Surge-Protected Outlets (4)

• Connect a printer, fax machine, or scanner to the "Surge-protected" outlets. These outlets do not

provide power during power failure.

CAUTION: NEVER connect a laser printer or scanner to the battery backup sockets of UPS. The

equipment may draw significantly power to overload the UPS

4. Turn On/Off the UPS

•

To turn on the UPS unit, hold the power button until you hear a beep. To turn off the UPS unit,

hold the power button until it beeps. Then, display will shut off.

5. Install software (Optional for advanced users)

For optimal computer system protection, install UPS monitoring software to fully configure the UPS

system. Please follow steps below to download and install monitoring software.

1. Go to the website http://www.V7-world.com/downloads

2. Select ViewPower software for your operating system to download the software.

3. Follow the on-screen instructions to install the software.