Finishing The Installation - LUCCI Air Mariner Guide D'installation

Mariner Installation Instructions

After completing the electrical connection at the mounting bracket terminal block, connect the ceiling
fan wiring via the quick connector plug.

Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy
and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using
the screws provided.
How to replace the LED driver (For models with light kit)
NOTE: Always turn Off the power at the mains switch before attempting to replace the LED driver.
Loosen the screw (A) to lift the top housing (B). Replace the LED driver by unplugging the connectors (C,
D). Reposition the top housing and secure it on the down rod by screw.
9 | P a g e

FINISHING THE INSTALLATION

Fig. 7
Fig. 8