3.4. Master/ slave Mode
Press the "MODE", enter slave mode "
".
If in this mode, the fixture working mode will all follow the host changing.
3.5. Sound Active Mode
1) Press the "MODE", enter sound active mode "Soud".
2) Press the "SETUP", enter to set the sound active sensitivity.
3) Press the "UP" or DOWN", the user can set the sound active sensitivity "
".
~
3.6. Static Color Mode
1) Press the "MODE", enter static color mode "
".
2) Press the "SETUP" can select the static colors: r.255, g.255, b.255, u.255, A.255.
3) Press the "UP" or "DOWN", the user can adjust the monochrome brightness value, the
maximum value is 255, will achieve the color dimming effect.