Nicols PAR LED 1215 FC Manuel D'utilisation page 8

DMX channels: 5, 7, 9 CH
DMX linking: 3-pin
Operation mode: DMX mode, slave mode, built-in programs, auto running, sound active,
static color
Lumen:
R 535lux@2m
G 740lux@2m
B 840lux@2m
W 980lux@2m
A 390lux@2m
RGBWA 3050lux@2m
Power linking: 13pcs/240V
Weight: 4.24kg
Size: 233*300**289cm
3. OPERATION
This series of product has rich effect programs, easier operation, there are six working
modes:
3.1. Built-in Programs
1) Press the "MODE", enter built-in programs mode menu " ".
2) Press the "UP" or DOWN", select the effect programs " — ".
3) When the LED display show " ", press the "SETUP" can enter into static color
editing environment, press the "UP" or "DOWN" can select the static colors (1.rgb, 2.—r,
3.--g, 4.—b, 5.-u, 6.—A, 7.-rg, 8.—rg, 9.-rb, 10.rb, 11.gb, 12.ru, 13.gu, 14.bu, 15.rA, 16.gA,
17.bA, 18.uA, 19.on, -OFF), and then press the "SETUP" can set the preset static color
strobe " ", through the "UP" or "DOWN" can adjust the strobe speed
~ .
When the LED display show " — ", the first time press the "SETUP", will display
" ", now through the "UP" or "DOWN" can set the programs operation speed
; the second time press the "SETUP", will show " ", now through the "UP" or
~
"DOWN" can set the programs strobe speed
~ .
3.2. Auto Running Mode
Press the "MODE", enter auto running mode menu "AUTO".