Master/Slave Mode; Backlight Mode - Nicols PAR LED 188 FCB II Notice D'utilisation

OPERATION
1. DMX Mode :
DMX 512 Address Setting
Press the MENU button up to when the
DOWN and UP button to change the DMX 512 address. Once the address has been selected, press ENTER button to setup or
automatically exit menu mode without any change after 1 minute.. Back to the previous functions without any change press
MENU button.
2. Channel selection Mode :
Press the MENU button up to when the
will blink. Use DOWN and UP button to choose 4 CH or 8 CH mode. Once the mode has been selected, press the ENTER button
to setup or automatically return to the main functions without any change after 1 minute. To go back to the functions without any
change press the MENU button again.

3. MASTER/SLAVE Mode

Master/Slave Mode
Press the MENU button up to when the
DOWN and UP button to select the
(slave 4) mode. Once the mode has been selected, press the ENTER button to setup or automatically return to the main
functions without any change after 1 minute. To go back to the functions without any change press the MENU button again.
4. Performance Mode
Show Mode
Press the MENU button up to when the
select AUTO or the sound
press ENTER button to confirm, and use DOWN and UP button to select color 1-12 or fade speed 1-8. Once select, press
ENTER button to setup or automatically exit menu mode without any change after 1 minute. To go back to the last function
without any change press the MENU button.

5. Backlight Mode

LED display
Press the MENU button up to when the
DOWN and UP button to select
setup or exit menu mode without any change after 1 minute. Back to the functions without any change press MENU button again
6. Show positive and negative direction
Display Inverse
Press MENU button until
or (display inverse), press ENTER button to setup. Back to the functions without any change press MENU button.
All manuals and user guides at all-guides.com
is shown on the display. Pressing ENTER button and the display will blink. Use
is showing on the display. Pressing ENTER button and the display
is showing on the display. Pressing ENTER button and the display will blink. Use
(Master) or the
is shown on the display. Pressing ENTER button, Use DOWN and UP button to
or (fade) or
is shown on the display. Pressing ENTER button and the display will blink. Use
(display always on) or
is blinking on the display. Use DOWN and UP button to select
(slave 1) or (slave 2) or SL 3 (slave 3) or SL 4
(color), if you select the auto, sound, color or fade mode,
(display off ) mode. Once select, press ENTER button to
(display normal)