SICK KTX Prime Fiche Technique page 7

KTS/KTX Prime - réglage du seuil de commutation (apprentissage dynamique)
Suitable for teaching in moving objects.
1. Position background
Press the Set pushbutton
to start the teach-in process.
Example
Dark switching
Internal signal
received
Switching
threshold
Output Q
Switching characteristics
The optimum emitted light is selected automatically (at RGB variants).
Static teach-in: light/dark setting is defined using teach-in sequence.
Dynamic teach-in: switching output active on mark, if background is longer in the field of view during the teach-in.
The switching threshold is set in the center between the background and the mark.
Keylock (activation and deactivation): Press and hold the "+" pushbutton > 10 s.
The Q-LED (yellow) flashes and the "Err" error message appears on the display.
2020-11-07 08:26:25 | Fiche technique
Sujet à modification sans préavis
2. Move at least the mark
and background using
the light spot
The display lights up during repeat
length detection ( - - - ).
Switching
threshold
Internal signal
received
Output Q
KTX-WB9114124UZZZZ | KTX Prime
DÉTECTEURS DE CONTRASTE
Press the Set pushbutton to end
the teach-in process.
The Quality of Teach is displayed.
Light switching
DÉTECTEURS DE REPÈRES | SICK 7