Status; Settings; Set Clock; Adjusting Language - Dal Zotto MARTA IDRO 2.0 Manuel Utilisateur

SET CHRONO
WHEN THE WEEKLY PROGRAMMER IS ACTIVE, A BOX OF THE RELATIVE ICON WILL APPEAR ON THE
CONTROL BOARD.

STATUS

References reserved to the technician

SETTINGS

SET CLOCK

ADJUSTING LANGUAGE

� see chapter: commissioning settings
DISPLAY
DISPLAY
The " " menu contains two sub-menus:
� Key lock
� Brightness.
50
CONTROLS PROCEDURE
� Press key 6.
� Proceed by pressing key 2 until SET CHRONO is displayed.
� Con rm using key 6.
� Use keys 4-5 to enable/disable - set/edit the time.
� Press key 2 to go forwards 3 to go back.
� Press key 1 several times to con rm and exit the menu.
DISPLAY
ENABLE CHRONO
ENABLE PRG1
ENABLE PRG2
ENABLE PRG3
ENABLE PRG4
START PRG1
STOP PRG1
MONDAY...SUNDAY
SET PRG1
START PRG2
STOP PRG2
MONDAY...SUNDAY
SET PRG2
START PRG3
STOP PRG3
MONDAY...SUNDAY
SET PRG3
START PRG4
STOP PRG4
MONDAY...SUNDAY
SET PRG4
TEMPERATURE
On/o
On/o
On/o
On/o
On/o
OFF-00:00-23:50
OFF-00:00-23:50
On/o
65-80°c
OFF-00:00-23:50
OFF-00:00-23:50
On/o
65-80°c
OFF-00:00-23:50
OFF-00:00-23:50
On/o
65-80°c
OFF-00:00-23:50
OFF-00:00-23:50
On/o
65-80°c
ENGLISH
MEANING
Enable/disable the whole set chrono
Enable/disable PRG1
Enable/disable PRG2
Enable/disable PRG3
Enable/disable PRG4
PRG1 ignition time
PRG1 switch-o time
Enable/disable the days of PRG1
PRG1 boiler temperature
PRG2 ignition time
PRG2 switch-o time
Enable/disable the days of PRG2
PRG2 boiler temperature
PRG3 ignition time
PR3 switch-o time
Enable/disable the days of PRG3
PRG3 boiler temperature
PRG4 ignition time
PRG4 switch-o time
Enable/disable the days of PRG4
PRG4 boiler temperature