Set Power; Temperature Set; User Menu; Enable Fan - Dal Zotto MARTA IDRO 2.0 Manuel Utilisateur

SET POWER

The following menu allows you to set the generator power Minimum power 1, maximum power 5.
CONTROLS PROCEDURE
Press key 6.
�
Con rm using key 6 - SET POWER.
�
� Use keys 4 or 5 to set the power.
Press key 1 several times to con rm and exit the menu.
�

TEMPERATURE SET

The following menu allows you to set:
� The room temperature from OFF - 06 ...40°C (for intended models). The room temperature will be displayed alternately with the water
temperature on the display.
� The boiler temperature from 65 - 80°C.
CONTROLS PROCEDURE
� Press key 6.
Proceed by pressing key 2 until TEMPERATURE SET is displayed.
�
Con rm using key 6.
�
� Use keys 4 or 5 to set the ROOM AIR TEMP SET.
Con rm using key 6.
�
� Use keys 4 or 5 to set the H2O TEMP SET.
Press key 1 several times to con rm and exit the menu.
�

USER MENU

ENABLE FAN

This menu allows (for the models envisioned) to enable or disable the operation of the tangential fan.
CONTROLS PROCEDURE
Press key 6.
�
Proceed by pressing key 2 until USER MENU is displayed.
�
Con rm using key 6.
�
Use keys 4-5 to enable/disable ventilation.
�
Press key 1 several times to con rm and exit the menu.
�

V1 AIR

The menu allows the user to adjust the speed of the front fan in percentage (for envisioned models).
CONTROLS PROCEDURE
Press key 6.
�
Proceed by pressing key 2 until USER MENU is displayed.
�
Con rm using key 6.
�
Press key 2 until ''V1 AIR'' appears.
�
Use keys 4 -5 to increase (4) or decrease (5).
�
Press key 1 several times to con rm and exit the menu.
�
48 ENGLISH
1
1