Haier ESD100 Guide De L'utilisateur page 10

Selecting Wash Cycles
• Select the appropriate cycle based on the load
and soil level. For your convenience, the
dishwasher has Pots & Pans, Normal,
Glassware and Rinse & Hold wash cycles that
you can select from.
Pots & Pans Wash Cycle:
• This cycle is used for heavily soiled pots & pans,
cookware, dishware, silverware and glassware items with dried-on or baked-on
soils.
Note: This cycle may not remove burned-on foods.
Normal Wash Cycle:
• This cycle is used for medium or heavily soiled dishware, glassware and
silverware.
Glassware Wash Cycle:
• This cycle is used for lightly soiled glassware, chinaware, pre-rinsed dishes and
silverware.
Rinse & Hold Cycle:
• This cycle is used for rinsing partial loads that will be washed later.
Note: Do not use detergent with this cycle.
Selecting Wash Option
Hi-Temp Wash:
• You can select this option with Pots & Pans, Normal or Glassware wash cycles.
Note: Do not use this option with Rinse & Hold Cycle.
Note: When this option is selected, water temperature boosts up between
161˚ F – 167˚ F. "HI-TEMP WASH" helps: kill bacteria, dissolve detergents,
remove sticky and greasy substances off the dishware and as well as
effective cleaning.
Any
interruption during wash and rinse cycles or if the incoming water
Note:
temperature is too low, proper water heating temperature cannot be
achieved and the Hi-Temp Wash heating temperature conditions may be
affected.
English
8