4.
Load the paper with the side to be
printed facing up and with all four
corners aligned.
CAUTION!
Do not place paper over the right width guide.
Do not load paper exceeding the maximum fill
line or the maximum capacity allowed.
Align the right width guide with the paper
width correctly. If the right width guide is not
in place, the paper will not be properly fed
and this may cause paper jams.
5.
Close the lid of the paper tray and push
the tray completely into the printer.
CAUTION!
The lid of the tray must be firmly closed. If
not, the paper may become misaligned.
6.
Depending on the types and sizes of the
loaded paper, you need to configure
settings on the control panel.
Change the paper type when non-plain
paper such as recycled paper,
heavyweight paper or transparencies is
loaded.
Configure the paper size when custom
size paper is loaded.
The Control Panel and Menu system
For full details on the control panel and menu
structure, refer to the User's Guide.
The control panel components and their
functions are described below:
9
1 <MENU> button
2 <INFO> button
3 <READY> indicator
4 LCD display
5 <ATTENTION> indicator
6
7 <CANCEL> button
8 <Select> button
9
VarioLink 4550p Series Setup Guide
English - 8
5
3
1
2
8
Press to move to menu operation.
Press to print the menu map. The menu map
(2pages) will print with all the current printer
settings.
When the light is on, the printer is ready to
receive data from the computer.
Displays the setting items, machine status, and
messages.
When the light is on, there is a malfunction in
the printer.
<On-Line> button
Press to enter the off-line status. When in the
off-line status, the machine cannot receive data
or process printing. Press again to exit the off-
line status and enter the on-line status (where
the machine can receive data from the
computer).
Press to cancel printing.
Press to exit Menu Mode.
Press to select the currently displayed menu on
setting.
< > < > < > < > buttons
Press these to move to the required menu, item
and candidate value on the display.
4
6
7