Publicité
Les langues disponibles
Les langues disponibles
Chevrolet Suburban 2500
2001 - ....
Ref. 1337
Fitting instructions
1)
Remove, in the rear at the bottom, the two bolts wich attach the bumper supports on the chassis.
2)
Attach mounting piece (e) with points (B) against the underside in the middle of the bumper on the
provided holes. Insert the necessary bolts, washers and nuts, but do not tighten them yet.
3)
Place the tow bar with points (A) against the underside of the chassis beams, points (C) fit those of the
already mounted piece (e). Place the mounting pieces (f) in the chassis beams, insert the necessary bolts,
washers and nuts here also, but do not tighten them.
Insert at point (C) the bolts, washers and nuts, and tighten everything firmly.
4)
Assemble the (*) and also tighten firmly.
Composition
1 tow bar reference 1337
1 flange ball 50V
4 bolts M10x45
4 safety washers M10
4 nuts M10
6 bolts M14x45
4 bolts M14x40
10 safety washers M14
10 nuts M14
8 washers 40x35x15x4
1 mounting piece (e)
6 mounting pieces (f)
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(A)
(B-C)
(A-B-C)
(A-B-C)
(A-B)
(B-C)
(A)
All bolts and nuts: quality 8.8
4x4
Publicité
