REMIS REMIfront IV-D Notice De Montage page 16

B16
US/GB
B17
B18
B19
B20
B21
16/64
B16:
Place pre-mounted front system on the A-column as
shown.
B17:
Mount the front system on the A-column in the position
shown. Ensure that the clips slot in properly.
B18:
Push the rubber seal back on.
B19+B20:
Screw the thread site of the upper (short) and lower (long)
guide pipe on the upper or lower parts of the left cladding
respectively (do not tighten).
B21:
Push bracket pipe as shown onto the lower guide line to
the middle.