For Model CL24WC2:
Control elements
1) "
" button
To turn this unit ON and OFF, press and
hold this button for approximately 3
seconds.
2) "
" button
Energy conservation button: Pressing this
button for 3 seconds will turn the energy
conservation mode either ON or OFF. In
this mode, the LED light and display will
be turned off; the °F/°C light will be on.
3) "
" button (left)
Pressing this button will increase (warm)
the temperature of the upper chamber in
steps of 1F (or 1C).
4) "
" button (left)
Pressing this button will lower (cool) the
temperature of the upper chamber in steps
of 1F (or 1C).
5) LED display
Displays temperature for the upper zone.
6) "
" indicator light
Indicates that compressor is operating.
7) "°C/°F " indicator light
Will change as the "°C/°F " button is
pressed.
8) LED display
Displays temperature for the lower zone.
Operation
9) "
" button (right)
Pressing this button will increase (warm) the
temperature of the lower chamber in steps of
1F (or 1C).
10) "
" button (right)
Pressing this button will lower (cool) the
temperature of the lower chamber in steps of
1F (or 1C).
11) "°C/°F " button
Pressing this button switches the indicator
light between °C and °F.
12)
"
"
Turns the interior light ON or OFF. (If you
use this button, the light is no longer con-
trolled by the reed switch, and remains ON.)
Setting the temperature
When you press the
system will enter the set-up mode in the
upper or lower compartment automatically.
The LED will flash and display the setting
temperature.
When you press the button once, the
temperature will increase or decrease by
1F (or 1C). If you try to go beyond the
minimum/maximum value that can be
established, the display will jump to the
lowest/highest adjustable temperature value
automatically. If a button is not pressed for 5
seconds, the LED will stop flashing and the
setting mode will be exited.
Temperature range for upper and lower
compartments: The temperature setting can
be adjusted from 39°F to 64°F (or 4°C to
18°C).
10
button
or
button, the